| Quantity: | |
|---|---|
MLX800
| 8Ω立体声输出功率8Ω Stereo | 2x350w | 2x550w | 2x800w |
| 4Ω立体声输出功率4Ω Stereo | 2x500w | 2x800w | 2x1200w |
| 8Ω桥接单声道输出8Ω Bridge | 600W | 1000W | 1500W |
| 4Ω桥接单声道输出4Ω Bridge | 900W | 1500W | 2200W |
| 通道数Channels | 2 | ||
| 输出电路Output Circuit | CLASS H | ||
| 频率响应Frequency Response | 20Hz-20KHz(+0/-0.5dB) | ||
| 输入灵敏度Input Impedance | 0.7V/1.0V/1.5V | ||
| 输入阻抗Input Impedance平衡Balanced | 20K ohms | ||
| 不平衡Unbalanceq | 10K ohms | ||
| 串音Cross Talk | >80dB | ||
| 信噪比S/N Ratio | 103dB | ||
| 阻尼系数Damping Factor | >400 | ||
| 总谐波失真THD+N | <0.05%20Hz-20KHz | ||
| 瞬态响应Slew Ratio | 40V/ms | ||
| 控制器Control 前面板Front pan | POWER开关，Volume Switch音量控制器 | ||
| 后面板Rear pane | MODE开关(ST/BRG/PAR) | ||
| 接口Connect 输入Inpu | XLR | ||
| 输出Output | SPEAKON | ||
| 指示灯Indicator Light | POWER,SIGNAL,PROTECT,CLIP | ||
| 负载保护Overload Protect | POWER,DC FAULT,输出继电器开关 | ||
| 功放保护Amplifier Protect | 过热：输出静音(散热片温度>)(自动恢复) | ||
| 冷却风扇Fans | 可变速风扇X2 | ||
| 电源要求Power AC | 220V-240V | ||
| 机架空间Rack Space | 2U | ||
| 包装尺寸Packing Size | 580x570x140mm 1pcs/carton | ||
| 重量Gross Weight | 18 KG | 20 KG | 22 KG |
| 包含附件Attachments | 电源线POWER CABLE,使用说明书USER MANUAL | ||
The Aluminum Panel 2U Two Channel Class H Power Amplifier 2x800W RMS 8Ω is a premium audio solution designed for discerning professionals who demand uncompromising power, reliability, and sonic accuracy. With a pure Class H topology, this amplifier delivers 800W RMS per channel at 8Ω, dynamically adjusting its power supply to maintain linear performance across all volume levels. The sleek aluminum front panel not only enhances heat dissipation but also adds a touch of elegance, making it a centerpiece in both studio and live sound setups.
True Class H Topology: Employs a dual-voltage rail system to optimize power transfer, providing Class AB sound quality with Class D efficiency (85%). Achieves a signal-to-noise ratio of 115dB and low THD+N (<0.03% at 1kHz, 1W), ensuring faithful audio reproduction from subtle piano notes to thunderous bass drops.
Premium Aluminum Construction: The 5mm anodized aluminum front panel acts as an effective heat sink, complemented by a whisper-quiet fan system that remains silent during low to medium loads. The 2U steel chassis with rubber feet reduces vibration-induced noise in studio environments.
Flexible Connectivity & Control: Features balanced XLR, unbalanced RCA, and 1/4" TRS inputs, with individual channel link switches for stereo/bridge modes. Front-panel VU meters provide real-time output monitoring, while rear-panel binding posts accommodate both banana plugs and spade connectors.
Studio-Grade Signal Processing: Includes a built-in 3-band EQ per channel (bass/mid/treble) with bypass switch, allowing tone shaping without external processors. High-pass filters at 50Hz protect speakers from subsonic damage.
Recording Studios & Broadcast: Delivers accurate audio reproduction for mastering and monitoring, with low noise floor and precise frequency response.
High-End Live Venues: Powers boutique clubs, theaters, and corporate events where audio fidelity is paramount, ensuring every instrument and vocal is rendered with clarity.
Home Audiophile Systems: Suitable for high-end home theaters and two-channel setups, combining robust power with refined aesthetics.
Backed by a 3-year warranty, including free calibration services within the first year. Warranty covers all internal components, excluding accidental damage or improper voltage use.
Q: What does "RMS 8Ω" mean for power output?
A: RMS (root-mean-square) indicates continuous power output under real-world conditions, ensuring the amplifier can sustain 800W per channel at 8Ω without clipping or overheating.
Q: Can I use this amplifier for bi-amping?
A: Yes, the two independent channels can power separate high and low-frequency speakers, with the built-in crossover facilitating seamless integration.
Q: How much does it weigh?
A: The amplifier weighs 12kg, balancing sturdiness with manageable rack-mount installation.
Q: Is there a built-in limiter to prevent speaker damage?
A: Yes, a soft-clipping limiter engages at 10% above rated power, protecting speakers from sudden overloads while allowing transient peaks.
| 8Ω立体声输出功率8Ω Stereo | 2x350w | 2x550w | 2x800w |
| 4Ω立体声输出功率4Ω Stereo | 2x500w | 2x800w | 2x1200w |
| 8Ω桥接单声道输出8Ω Bridge | 600W | 1000W | 1500W |
| 4Ω桥接单声道输出4Ω Bridge | 900W | 1500W | 2200W |
| 通道数Channels | 2 | ||
| 输出电路Output Circuit | CLASS H | ||
| 频率响应Frequency Response | 20Hz-20KHz(+0/-0.5dB) | ||
| 输入灵敏度Input Impedance | 0.7V/1.0V/1.5V | ||
| 输入阻抗Input Impedance平衡Balanced | 20K ohms | ||
| 不平衡Unbalanceq | 10K ohms | ||
| 串音Cross Talk | >80dB | ||
| 信噪比S/N Ratio | 103dB | ||
| 阻尼系数Damping Factor | >400 | ||
| 总谐波失真THD+N | <0.05%20Hz-20KHz | ||
| 瞬态响应Slew Ratio | 40V/ms | ||
| 控制器Control 前面板Front pan | POWER开关，Volume Switch音量控制器 | ||
| 后面板Rear pane | MODE开关(ST/BRG/PAR) | ||
| 接口Connect 输入Inpu | XLR | ||
| 输出Output | SPEAKON | ||
| 指示灯Indicator Light | POWER,SIGNAL,PROTECT,CLIP | ||
| 负载保护Overload Protect | POWER,DC FAULT,输出继电器开关 | ||
| 功放保护Amplifier Protect | 过热：输出静音(散热片温度>)(自动恢复) | ||
| 冷却风扇Fans | 可变速风扇X2 | ||
| 电源要求Power AC | 220V-240V | ||
| 机架空间Rack Space | 2U | ||
| 包装尺寸Packing Size | 580x570x140mm 1pcs/carton | ||
| 重量Gross Weight | 18 KG | 20 KG | 22 KG |
| 包含附件Attachments | 电源线POWER CABLE,使用说明书USER MANUAL | ||
The Aluminum Panel 2U Two Channel Class H Power Amplifier 2x800W RMS 8Ω is a premium audio solution designed for discerning professionals who demand uncompromising power, reliability, and sonic accuracy. With a pure Class H topology, this amplifier delivers 800W RMS per channel at 8Ω, dynamically adjusting its power supply to maintain linear performance across all volume levels. The sleek aluminum front panel not only enhances heat dissipation but also adds a touch of elegance, making it a centerpiece in both studio and live sound setups.
True Class H Topology: Employs a dual-voltage rail system to optimize power transfer, providing Class AB sound quality with Class D efficiency (85%). Achieves a signal-to-noise ratio of 115dB and low THD+N (<0.03% at 1kHz, 1W), ensuring faithful audio reproduction from subtle piano notes to thunderous bass drops.
Premium Aluminum Construction: The 5mm anodized aluminum front panel acts as an effective heat sink, complemented by a whisper-quiet fan system that remains silent during low to medium loads. The 2U steel chassis with rubber feet reduces vibration-induced noise in studio environments.
Flexible Connectivity & Control: Features balanced XLR, unbalanced RCA, and 1/4" TRS inputs, with individual channel link switches for stereo/bridge modes. Front-panel VU meters provide real-time output monitoring, while rear-panel binding posts accommodate both banana plugs and spade connectors.
Studio-Grade Signal Processing: Includes a built-in 3-band EQ per channel (bass/mid/treble) with bypass switch, allowing tone shaping without external processors. High-pass filters at 50Hz protect speakers from subsonic damage.
Recording Studios & Broadcast: Delivers accurate audio reproduction for mastering and monitoring, with low noise floor and precise frequency response.
High-End Live Venues: Powers boutique clubs, theaters, and corporate events where audio fidelity is paramount, ensuring every instrument and vocal is rendered with clarity.
Home Audiophile Systems: Suitable for high-end home theaters and two-channel setups, combining robust power with refined aesthetics.
Backed by a 3-year warranty, including free calibration services within the first year. Warranty covers all internal components, excluding accidental damage or improper voltage use.
Q: What does "RMS 8Ω" mean for power output?
A: RMS (root-mean-square) indicates continuous power output under real-world conditions, ensuring the amplifier can sustain 800W per channel at 8Ω without clipping or overheating.
Q: Can I use this amplifier for bi-amping?
A: Yes, the two independent channels can power separate high and low-frequency speakers, with the built-in crossover facilitating seamless integration.
Q: How much does it weigh?
A: The amplifier weighs 12kg, balancing sturdiness with manageable rack-mount installation.
Q: Is there a built-in limiter to prevent speaker damage?
A: Yes, a soft-clipping limiter engages at 10% above rated power, protecting speakers from sudden overloads while allowing transient peaks.